QMTECH Cyclone V 5CEFA2F23 Development Board

Dónde poder conseguir la placa, cómo construirla tu mismo, reparaciones, modificaciones, proyectos derivados

Moderador: jepalza

Monstronio
PLA
Mensajes: 25
Registrado: 01 Sep 2019, 21:59

Re: QMTECH Cyclone V 5CEFA2F23 Development Board

Mensaje por Monstronio » 12 Jun 2020, 17:44

Some crazy idea to recreate the keyboard.
Adjuntos
IMG_20200611_140125.jpg
IMG_20200611_140125.jpg (2.69 MiB) Visto 131 veces
IMG_20200611_140343.jpg
IMG_20200611_140343.jpg (3.05 MiB) Visto 131 veces
IMG_20200611_140854.jpg
IMG_20200611_140854.jpg (3.21 MiB) Visto 131 veces
IMG_20200611_141249.jpg
IMG_20200611_141249.jpg (3.05 MiB) Visto 131 veces
IMG_20200611_141320.jpg
IMG_20200611_141320.jpg (2.95 MiB) Visto 131 veces

Monstronio
PLA
Mensajes: 25
Registrado: 01 Sep 2019, 21:59

Re: QMTECH Cyclone V 5CEFA2F23 Development Board

Mensaje por Monstronio » 17 Jun 2020, 17:13

I looked closely at the source code of the project from ingloriond ( https://github.com/ingloriond/Unamiga/t ... es/ZX_NEXT ) and noticed that the PIN_K21 (MOUSE DATA) & PIN_K22 (MOUSE CLK) pins were mixed up !!!

I tried to recompile the project for the correct pinout, but as a result I got a similar situation as with the Benitoss projects. The keyboard works, there is a reaction to pressing the F1 key. But ... I could not see the loaded system ... Black screen only or graphic artifacts may appear or the message "Error opening` menu.ini / .def`!"

Responder

Volver a “Hardware”